Tinker & Rasor Shunts are available
in three sizes:
-
Orange, 0.001 Ohm, 25 Amp capacity
-
Yellow, 0.01 Ohm, 8 Amp Capacity
-
Red, 0.1 Ohm, 2 Amp capacity
|
|
T-1 and T-3 Adapters allow fitting
of Tinker & Rasor CP test stations on existing riser pipe of varying sizes.
Choose from these sizes:
-
T-3 Adapter, 3" pipe to 2" pipe
-
T-3 Adapter, 3" pipe to 1" pipe
-
T-1 Adapter, 1" pipe to 3/4" pipe
|
|
| The Tinker & Rasor Shock Guard fits
the Model T-3 "Top Hat" test station. The Shock Guard fits on one side
of the test station terminal, keeping field personnel and others away from
wire connections. The Tinker & Rasor Shock Guard minimizes the risk
of electrocution, and meets NACE Standard SP-01-77/4.4.4 when used with
non-metallic Tinker & Rasor Banana Plugs. |
|
The Tinker & Rasor Model T-3 Test
Station comes with standard rapid wire connection Binding Posts, as seen
at right, below. There are other kinds of terminal connectors available,
including Banana Plugs, as seen at right, above, with an exploded view
of the Shock Guard. Terminal Connectors available include:
-
Standard Binding Posts
-
Non-metallic Banana Plugs
-
18-8 Stainless Steel 1/4 x 20
-
Non-metallic 5-way Binding posts
-
and many more...
|
|
| "Anti-Spin" Gaskets are available for
all Tinker & Rasor Test Station models. The "Anti-Spin" gasket does
just that, it keeps the terminal from spinning on the riser pipe. This
prevents the test station from spinning or sliding off the riser and allows
superior tightening of the terminal nut.
|
|
The Model T-3 can come in many standard
and custom configurations. For example, nickel-plated brass Bonding Straps
are available. For more information on Model T-3 Terminal configurations,
see our terminal page.
|
|
| The T-3 Flange Adapter allows for easy
placement of T-3 Test Stations to pipe flanges, walls, wooden posts, and
other areas where the installation of riser pipe is inconvenient.
|
|
